TORO Dingo® – 6″, 12″ or 30″ Auger Attachment

The high torque head provides a large amount of torque (power) to the auger at a slower speed. The high torque (power) translates into the Dingo’s capability to dig 30″ (76.2 cm) holes up to 6′ (1.8 m) deep in clay, gravel, sandstone and many other conditions where lower torque heads get stuck.

The flighting on all Toro augers is connected to the shaft by a continuous weld. Most other auger flightings are tack welded at 2 or 3 spots on the shaft.

Single Directional Pivot – Front to back directional pivot provides the operator with exceptional control when digging with large augers. The single directional pivot prevents the auger from kicking left to right and reduces flailing.

Horizontal Lockout – The head locks in the horizontal position for usage with the Toro Cement Bowl, Capstand Adapter and more.

High Torque Drive – The high torque drive provides a tremendous 1515 ft-lbs of torque at 3000 psi with a bit speed of 57 rpm to break through the toughest ground.

Planetary Gear Drive – The plantetary gear drive provides high speeds and maximum torque to the auger, while transmitting minimal stress on the auger head components. The planetary gear drive insures the longevity of the hydraulic motor.

Auger Speed	57 rpm @11 gpm(41.6 lpm), 95% efficiency
Torque	1515 ft-lb @3000 psi, @11 gpm (461 m-kg @ 207 Bar, @ 72 lpm)
Auger Attachment Size	6”, 12″ or 30″